SOLID CARBIDE ENDMILLS

H Series - Flat End
Specificly desined for machining hardened steel after heat treatment up to 65 HRC. Made from super micro-grain Tungsten Carbide rods imported from Germany, and coated with special heat and wear resistent layer inveneted in Japan. When machining high hardness material with H series tools, you can apply faster feed rate to finish your tasks in shorter time. When machining softer materials, the ability to resist wear will increase total quantity of the workpices you can finish with earch cutting tool.。
he-full.jpg
he-full.jpg
series-h1.jpg
series-h1.jpg
PlayPause
previous arrowprevious arrow
next arrownext arrow
Shadow
ntopic1.png
螺旋角38度 刃徑公差 柄徑公差 鎢鋼等級 WXS鍍層 適用熱處理鋼材  
ntopic2.png
斜坡 倒角 平面 圓孔 溝槽 槽穴 側壁
ntopic3.png
For hardened steel after heat-treatment process or hardness over 45 HRC, such as SKD1/4/10/11/61.
ntopic4.png
Capable of machining steel of high hardness, durable cutting edges, long serviceable life, conisistent quality.

  • Ordering Number Diameter of Cut
    D1    		 Length of Cut
    L2    		 Effective Length
    L3
    Radius
    R    		 Length of Shank
    D2    		 Overall Length
    L1
    Flutes
    Z    		 Stock
    EHF02004050-0402 2 4 - - 4 50 2 Y
    EHF02004050-0602 2 6 - - 4 50 2 Y
    EHF03004050-0602 3 6 - - 4 50 2 Y
    EHF03004050-0902 3 9 - - 4 50 2 Y
    EHF04004050-0802 4 8 - - 4 50 2 Y
    EHF04004050-1202 4 10 - - 4 50 2 Y
    EHF06006050-1202 6 16 - - 6 58 2 Y
    EHF06006050-1802 6 20 - - 6 58 2 Y
    EHF08008063-1602 8 16 - - 8 63 2 Y
    EHF08008063-2502 8 25 - - 8 63 2 Y
    EHF10010070-2002 10 20 - - 10 70 2 Y
    EHF10010070-3002 10 30 - - 10 70 2 Y
    EHF12012079-2402 12 24 - - 12 79 2 Y
    EHF12012079-3502 12 35 - - 12 79 2 Y

  • Ordering Number Diameter of Cut
    D1    		 Length of Cut
    L2    		 Effective Length
    L3
    Radius
    R    		 Length of Shank
    D2    		 Overall Length
    L1
    Flutes
    Z    		 Stock
    EHF02004050-0404 2 4 - - 4 50 4 Y
    EHF02004050-0604 2 6 - - 4 50 4 Y
    EHF03004050-0604 3 6 - - 4 50 4 Y
    EHF03004050-0904 3 9 - - 4 50 4 Y
    EHF04004050-0804 4 8 - - 4 50 4 Y
    EHF04004050-1204 4 10 - - 4 50 4 Y
    EHF06006050-1204 6 16 - - 6 58 4 Y
    EHF06006050-1804 6 20 - - 6 58 4 Y
    EHF08008063-1604 8 16 - - 8 63 4 Y
    EHF08008063-2504 8 25 - - 8 63 4 Y
    EHF10010070-2004 10 20 - - 10 70 4 Y
    EHF10010070-3004 10 30 - - 10 70 4 Y
    EHF12012079-2404 12 24 - - 12 79 4 Y
    EHF12012079-3504 12 35 - - 12 79 4 Y

  • Operation Data

  • Example of Machining

  • Catalogs & Flyers

Phoca Cart Category Module

Phoca Cart Filter Module

Price: € 500,00 - € 2.000,00
Professional distributor & manufacturer, we provide you machining technology and total solution of products, not only products, but also increasing your competetiveness

PRODUCTS

LINKS

CONTACT

  • Chou & Hsieh Co., Ltd.
  • 2F, No. 82-1, Sec. 1, Guanfu Rd., Sanchong Dist., New Taipei City, 24158, Taiwan

  • TEL: 02-85124699
  • FAX: 02-85124709
  • sales@3dmilling.com.tw